Part Number DOT-BRMRTS-0608, DOT-BRMRTS Series 3/8 in. Tube x 1/2 in. NPTF Swivel Male Run Tee Fitting On Kuriyama of America, Inc.

Eastern Rubber & Plastics > Kuri Tec® Thermoplastic Hose/Tubing > Endure™ DOT Air Brake Fittings > DOT-BRMRTS Series Swivel Male Run Tee Fittings > Part Number DOT-BRMRTS-0608

Request Information

Male RN Tee Swivel 3/8 TB x 1/2 NPTF

Unit of Measure

General Applications

N/A

Pneumatic circuits for truck and trailers: air suspension, braking systems, transmissions, locking doors and windows, seat adjustment, instrumentation, air conditioning systems, horn, wiper motors, valves, cylinders and accessories.
Suitable for all air assisted applications except those designed for use between frame and axle or between towed and towing vehicles.

Construction

Construction	N/A Brass housing with polyethylene holding ring and nitrile (NBR) seals.
Body and Release	N/A Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N
Seals	N/A NBR (Low Temperature)
Holding Ring	N/A Resin (PEI)
Gripping Collet	N/A Stainless Steel AISI 301
Protection Ring	N/A Resin (PEI)
Tube	N/A Tube Support (in)

Recommended Tubing

N/A Designed to work with Endure™ Air Brake tubing or other tubing that complies with DOT FMVSS 106 and meets the performance requirements of SAE J844.

Temperature Range

Temperature [Min]	N/A -50 ºC-58 ºF
Temperature [Max]	N/A 100 ºC212 ºF

Nominal Specifications

Tube OD	N/A 3/8 in
Tube ID¹	N/A 0.244 in
D1 NPTF	N/A 1/2 in
D2	N/A 0.630 in
L1	N/A 0.669 in
L2	N/A 1.339 in
L3	N/A 2.126 in
Hex	N/A 7/8 in
Weight Each	N/A 0.178 lb
Pieces per Package²	N/A 25

Specifications

Brand	N/A Kuri Tec®
Type	N/A Push-to Connect Tee Fittings
Style	N/A Swivel Male Branch Tee
Series	N/A DOT-BRMRT
Max. Pressure	N/A 290 psi
Vacuum Rating	N/A 29 inHg
Tubing Insertion Depth L	N/A 0.720 in
Norm Reference	N/A ANSI/ASME B1.20.3
Tightening Torque	N/A 8.85 ft·lb
Thread	N/A Tube
Thread 2	N/A NPTF PTFE Coated

Assembly Instructions

N/A

Cut the tube square (with a hose cutter) making sure that there are no burrs and that the tube is round.
Insert the tube into the fitting until it bottoms.

Tube release
While pressing on the release ring, pull the tube from the fitting.

Once the tubing is connected to the fitting, make sure that the tubing is not pulled or stretched and that the minimum bend radius stated in the tubing section of this catalog is not exceeded.

To prevent accidental tube release, be certain that nothing comes in contact with the release ring. Any load on the release ring may cause an unwanted disconnection.

¹ The "Tube ID (in)" column heading refers to "Tube Support ID (in)".
² Only sold in package quantities.

General Applications

General Applications

Construction

Construction

Body and Release

Seals

Holding Ring

Gripping Collet

Protection Ring

Tube

Recommended Tubing

Recommended Tubing

Temperature Range

Temperature [Min]

Temperature [Max]

Nominal Specifications

Tube OD

D1 NPTF

D2

L1

L2

L3

Hex

Weight Each

Specifications

Brand

Type

Style

Series

Max. Pressure

Vacuum Rating

Tubing Insertion Depth L

Norm Reference

Tightening Torque

Thread

Thread 2

Assembly Instructions

Assembly Instructions