Eastern Rubber & Plastics Inc.
100 Goldman Drive, Plumsted Industrial Park
New Egypt, NJ 08533
E-Mail: Sales@easternrubber.com
Phone: 888-758-0100
Fax: 800-445-7138

Website: https://www.easternrubber.com/
Print Back
DOT-BRUNT Series Union Tee Fittings
DOT-BRUNT Series Union Tee Fittings - 2
Unit of Measure
Items DOT-BRUNT Series Union Tee Fittings
DOT-BRUNT-0404
DOT-BRUNT Series 1/4 in. Tube x 1/4 Tube Union Tee Fitting 		DOT-BRUNT Series Union Tee Fittings
DOT-BRUNT-0606
DOT-BRUNT Series 3/8 in. Tube x 3/8 Tube Union Tee Fitting 		DOT-BRUNT Series Union Tee Fittings
DOT-BRUNT-0604
DOT-BRUNT Series 3/8 in. Tube x 1/4 Tube Union Tee Fitting 		DOT-BRUNT Series Union Tee Fittings
DOT-BRUNT-0808
DOT-BRUNT Series 1/2 in. Tube x 1/2 Tube Union Tee Fitting 		DOT-BRUNT Series Union Tee Fittings
DOT-BRUNT-0806
DOT-BRUNT Series 1/2 in. Tube x 3/8 Tube Union Tee Fitting
Description N/A Union Tee 1/4 TB x 1/4 TB N/A Union Tee 3/8 TB x 3/8 TB N/A Union Tee 3/8 TB x 1/4 TB N/A Union Tee 1/2 TB x 1/2 TB N/A Union Tee 1/2 TB x 3/8 TB
General Applications N/A
  • Pneumatic circuits for truck and trailers: air suspension, braking systems, transmissions, locking doors and windows, seat adjustment, instrumentation, air conditioning systems, horn, wiper motors, valves, cylinders and accessories.
  • Suitable for all air assisted applications except those designed for use between frame and axle or between towed and towing vehicles.
Construction N/A Brass housing with polyethylene holding ring and nitrile (NBR) seals.
Body and Release N/A Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N
Seals N/A NBR (Low Temperature)
Holding Ring N/A Resin (PEI)
Gripping Collet N/A Stainless Steel AISI 301
Protection Ring N/A Resin (PEI)
Tube N/A Tube Support (in)
Recommended Tubing N/A Designed to work with Endure™ Air Brake tubing or other tubing that complies with DOT FMVSS 106 and meets the performance requirements of SAE J844.
Temperature [Min] N/A -50 ºC-58 ºF
Temperature [Max] N/A 100 ºC212 ºF
Tube OD1 N/A 1/4 in N/A 3/8 in N/A 3/8 in N/A 1/2 in N/A 1/2 in
Tube ID11 N/A 0.165 in N/A 0.244 in N/A 0.244 in N/A 0.362 in N/A 0.362 in
Tube OD2 N/A 1/4 in N/A 3/8 in N/A 1/4 in N/A 1/2 in N/A 3/8 in
Tube ID22 N/A 0.165 in N/A 0.244 in N/A 0.165 in N/A 0.362 in N/A 0.244 in
D2 N/A 0.472 in N/A 0.630 in N/A 0.630 in N/A 0.787 in N/A 0.787 in
D3 N/A 0.472 in N/A 0.630 in N/A 0.472 in N/A 0.787 in N/A 0.630 in
L1 N/A 0.846 in N/A 1.004 in N/A 0.945 in N/A 1.063 in N/A 1.102 in
L2 N/A 1.693 in N/A 2.008 in N/A 2.008 in N/A 2.220 in N/A 2.220 in
Weight Each N/A 0.055 lb N/A 0.116 lb N/A 0.106 lb N/A 0.184 lb N/A 0.178 lb
Pieces per Package3 N/A 25
Brand N/A Kuri Tec®
Type N/A Push-to Connect Tee Fittings
Style N/A Union
Series N/A DOT-BRUNT
Max. Pressure N/A 290 psi
Vacuum Rating N/A 29 inHg
Tubing Insertion Depth L N/A 0.642 in N/A 0.720 in N/A 0.720 in N/A 0.775 in N/A 0.775 in
Thread N/A Tube
Thread 2 N/A Tube
Assembly Instructions N/A
  1. Cut the tube square (with a hose cutter) making sure that there are no burrs and that the tube is round.
  2. Insert the tube into the fitting until it bottoms.
Tube release
While pressing on the release ring, pull the tube from the fitting.

Once the tubing is connected to the fitting, make sure that the tubing is not pulled or stretched and that the minimum bend radius stated in the tubing section of this catalog is not exceeded.

To prevent accidental tube release, be certain that nothing comes in contact with the release ring. Any load on the release ring may cause an unwanted disconnection.
  • 1 The "Tube ID (in)" column heading refers to "Tube Support ID (in)".
  • 2 The "Tube ID (in)" column heading refers to "Tube Support ID (in)".
  • 3 Only sold in package quantities.