AG Poppet Industry Standard Male Coupler with Female Thread
Quick Release Couplings
INDUSTRY STANDARD - POPPET QP
Male coupling - Female thread
DN 6 to 25
1/4" to 1"
to max WP 350 bar 5075 PSI
Male coupling - Female thread
DN 6 to 25
1/4" to 1"
to max WP 350 bar 5075 PSI
Unit of Measure
Items |
/Asset/QPM-Male_Coupling-Female_Thread---Primary-Page-13.jpg QPM-0404-FNPR 1/4 in. Inside Diameter AG Poppet Industry Standard Male Coupler with Female Thread |
/Asset/QPM-Male_Coupling-Female_Thread---Primary-Page-13.jpg QPM-0606-FNPR 3/8 in. Inside Diameter AG Poppet Industry Standard Male Coupler with Female Thread |
/Asset/QPM-Male_Coupling-Female_Thread---Primary-Page-13.jpg QPM-1212-FNPR 3/4 in. Inside Diameter AG Poppet Industry Standard Male Coupler with Female Thread |
/Asset/QPM-Male_Coupling-Female_Thread---Primary-Page-13.jpg QPM-1616-FNPR 1 in. Inside Diameter AG Poppet Industry Standard Male Coupler with Female Thread |
||||
Description | N/A QD AG PV 1/4" Male x 1/4" FPT | N/A QD AG PV 3/8" Male x 3/8" FPT | N/A QD AG PV 3/4" Male x 3/4" FPT | N/A QD AG PV 1" Male x 1" FPT | ||||
General Features |
N/A
ARGUS Agricultural/Normal quick release couplings are used for quick coupling and uncoupling of hydraulic lines. During the coupling action in zero or low pressure ranges, valves that release or block the flow are
automatically activated. The QP quick release coupling, formed by the coupling plug and the coupling socket, is connected by pushing on a sleeve. This guarantees a flush connection between the two coupling halves.
|
|||||||
Materials | N/A galvanized steel with hardened parts subject to wear - NBR O-rings (other materials optional) - Thermoplastic dust cap and dust plug. Cr-III zinc plating through additional passivation for improved surface protection. | |||||||
Temperature Range [Min] | N/A -20 ºC-4 ºF | |||||||
Temperature Range [Max] | N/A 100 ºC212 ºF | |||||||
Brand | N/A Alfagomma® | |||||||
Type | N/A Male Coupler with Female Thread | |||||||
Weight | N/A 0.24691744 lb | |||||||
Dash | N/A 04 | N/A 6 | N/A 12 | N/A 16 | ||||
Inside Diameter | N/A 1/4 in6.0 mm | N/A 3/8 in10.0 mm | N/A 3/4 in19.0 mm | N/A 1 in25.0 mm | ||||
Working Pressure | N/A 5075 psi | N/A 3915 psi | N/A 2900 psi | N/A 2900 psi | ||||
Burst Pressure | N/A 20300 psi | N/A 15660 psi | N/A 11600 psi | N/A 11600 psi | ||||
Thread 1 | N/A NPTF | |||||||
F1 | N/A 1/4-18 | N/A 3/8-18 | N/A 3/4-14 | N/A 1-11 1/2 | ||||
D1 | N/A 14.1 mm | N/A 18.9 mm | N/A 27.9 mm | N/A 31.3 mm | ||||
CH | N/A 19.0 mm | N/A 24.0 mm | N/A 34.0 mm | N/A 41.0 mm | ||||
L1 | N/A 36.0 mm | N/A 40.0 mm | N/A 19.0 mm | N/A 64.0 mm | ||||
L | N/A 72.00 mm | N/A 83.00 mm | N/A 108.00 mm | N/A 127.00 mm | ||||
End Type | N/A Male | |||||||
Second End Type | N/A FPT | |||||||
Second End Size | N/A 1/4 in | N/A 3/8 in | N/A 3/4 in | N/A 1 in | ||||
Note |
N/A
Specific instructions for installation, use and maintenance are separately provided. Other threads available. Please consult factory. 1/2" size interchanges with ISO 7241 A. See page 9 for female part number. |
|||||||
|