Unit of Measure
Items
BRAID-Lock™ - Braided Construction 300 PSI Push-On Hose BLACK

BRAID-Lock™ 1/4 in. ID and 500 ft Reel Length Black Non-Conductive Braided Construction 300 PSI Push-On Hose

BRAID-Lock™ - Braided Construction 300 PSI Push-On Hose BLUE

BRAID-Lock™ 1/4 in. ID and 500 ft Reel Length Blue Non-Conductive Braided Construction 300 PSI Push-On Hose

Item Image - BRAID-Lock™ - Non-Conductive Braided Construction 300 PSI Push-On Hose (BL-06GR)

BRAID-Lock™ 1/4 in. ID and 500 ft Reel Length Green Non-Conductive Braided Construction 300 PSI Push-On Hose

BRAID-Lock™ - Braided Construction 300 PSI Push-On Hose GRAY

BRAID-Lock™ 1/4 in. ID and 500 ft Reel Length Grey Non-Conductive Braided Construction 300 PSI Push-On Hose

BRAID-Lock™ - Braided Construction 300 PSI Push-On Hose RED

BRAID-Lock™ 1/4 in. ID and 500 ft Reel Length Red Non-Conductive Braided Construction 300 PSI Push-On Hose
General Applications N/A
  • Air Tools
  • Low Pressure Pneumatic and Hydraulic Systems
  • Lubricating oils/diesel fuel
  • Robotic Welders in assembly where weld spatter is present
  • Water lines in plastic molding industry
Tube N/A Black Nitrile - RMA Class A oil resistance
Reinforcement N/A Braided Textile - Optimum Angle for Push-On Fitting Retention
Cover N/A PVC/Nitrile blend, RMA Class A oil resistant and MSHA approved.
Service Temperature [Min] N/A -30 ºF-34 ºC
Service Temperature [Max] N/A 180 ºF82 ºC
Features and Advantages N/A
  • Non-Conductive - Tested to exceed minimum electrical resistance greater than one (1) megohm per inch of hose length at 1000 volts DC.
  • MSHA Approved Flame Resistant Cover.
  • Superior End Retention- no clamps or ferrules required when using Push-On fittings - ends remain attached at 4:1 burst pressure.
  • Easy to couple - no tools required.
  • RMA Class "A" tube and cover oil resistance.
  • Wide range of applications where performance and ease of assembly are demanded.
Branding N/A BRAID LOCK™ NON CONDUCTIVE 300 PSI (SIZE) ID FLAME RESISTANT MSHA
Temperature Range N/A
Color N/A Black N/A Blue N/A Green N/A Grey N/A Red
ID N/A 1/4 in
OD N/A 0.48 in
Working Pressure N/A 300 psi
Reel Length N/A 500 ft
Weight N/A 0.09 lbs/ft
Brand N/A Kuriyama
Type N/A Push-On Hose
Style N/A Braided
Performance N/A Non-Conductive Braided Construction
Oil Resistance N/A RMA - Class A
Note N/A Cut lengths for this product are available from our Kuriyama Schaumburg, IL Warehouse location.

These are nominal reel footage quantities.

100 Goldman Drive
Plumsted Industrial Park
New Egypt, NJ 08533

888-758-0100

sales@easternrubber.com

EASTERN RUBBER & PLASTICS CO., INC.


Designed & Maintained for Eastern Rubber & Plastics Co., Inc. by American Dreadnought